DENO LED Lighting

LED Strip Lights — 8 Professional Series | DENO

DENO's product hub covers eight professional LED strip and linear-lighting series engineered for B2B projects: SMD (1 SDCM, Dim-to-Warm, 48V, Marine, Automotive), SOB dot-free, COB chip-on-board, Neon Flex (injection-moulded, 360°, mini), Wall Washer, FlexLite LED Panels, Linear Light bars and Aluminum Profiles. All series share 99.9% copper FPCB, ±5μm tolerance and CE / UL / RoHS certification.

How to choose a DENO LED strip series

DENO manufactures every series listed above in-house on a 105 μm electroplated Roll-to-Roll FPCB line, so the selection question is rarely about supply and almost always about optics, wattage and run length. SMD LED strips remain the workhorse for cove lighting and general architectural detailing: discrete emitters in 2216, 2835, 3014 or 5050 packages, 8 mm to 20 mm PCB widths, and cut units from 12.5 mm upward. SOB (solder-on-board) strips bond bare dice directly to the flexible circuit and cover them with a continuous phosphor layer, which removes visible dots without the rigidity of conventional COB tape — the right answer for grazing angles, shallow coves and diffusers under 15 mm. COB LED strips give the same dot-free line at a lower price point, while Neon LED strips wrap the emitter in extruded silicone for IP67/IP68 outdoor signage, handrails and facade contours.

Power and voltage decide the rest. A 24 V strip typically runs 5 m from a single feed before the far end drops below tolerance; 36 V and 48 V constant-current builds extend that to 15 m and up to 50 m respectively, and DENO's doubled copper cross-section halves the voltage drop again at any given wattage. For colour-critical retail, museum and studio work, choose a Full Spectrum grade at CRI 95+ with SDCM ≤3; for offices and corridors, a high-efficiency grade up to 200 lm/W keeps ErP energy class and installed load down. Aluminum profiles, power supplies, dimmers and controllers in the directory above complete the system, and every combination can be verified numerically in the ProCalc engineering suite before you request a quotation.

Every series page below lists real models with measured lumen output, wattage per metre, cut unit, PCB width and copper thickness. Sample orders, OEM private labelling and full ODM development are available on all of them.

LED strip product series & sub-series