DENO LED Lighting

Chasing COB LED Strip — Running Water Effect | DENO

DENO LED offers two models of SOB Chasing LED Strips, designed for dynamic lighting installations requiring individual pixel control. These 24V strips feature dot-free illumination and are available in 10W/m and 14.4W/m configurations, both with a CRI >90. Utilizing advanced SOB technology and 99.99% gold wire bonding, they ensure consistent color and performance. Typical applications include architectural accents, retail displays, and entertainment venues where sequential or animated lighting effects are desired.

SOB Chasing LED Strips models & key specifications (2)

24V SOB Chasing LED Strips Models (1)

16673 — SOB · 360 LEDs/m · 24V

16673 SOB Chasing LED Strips — 24V, cuttable every 83.3mm, 10mm FPCB width, SOB LEDs, 360 LEDs/m

LED Type: SOB · LED Density: 360 · Voltage: 24V · Power: 8.6~35W · Cutting Unit: 30LEDs/83.3mm · PCB Width: 10 · Copper Foil: 3oz · Circuit Type: CC

5V SOB Chasing LED Strips Models (1)

13894 — SOB · 320 LEDs/m · 5V

13894 SOB Chasing LED Strips — 5V, cuttable every 15.6mm, 10mm FPCB width, SOB LEDs, 320 LEDs/m

LED Type: SOB · LED Density: 320 · Voltage: 5V · Power: 24 W/m · Cutting Unit: 5LEDs/15.625mm · PCB Width: 10 · Copper Foil: 2oz · Circuit Type: CC

Chasing LED Strip — Buyer Questions

What is a chasing LED strip and how does it differ from plain RGB?

A chasing LED strip — also called a running water or flow LED strip light, and 'running horse' tape in the older trade catalogues — splits the run into individually driven segments so light travels along the line. Plain RGB changes the whole run at once; a chasing build animates it.

Which IC and protocol do the chasing boards use — WS2811, WS2812 or SPI/DMX?

SPI boards ship with WS2811, WS2812B, WS2815 or SK6812 class ICs depending on voltage and pixel pitch, and DMX512 versions are built for stage and architectural controllers. Tell DENO the console or controller you are using and the matching IC is fitted at production.

Can I get a smooth chasing effect LED strip at 24V?

Yes — the 16673 white chasing build runs 360 LEDs/m at 24V with an 83.3 mm segment, which gives a clean flowing wipe over long architectural lines while keeping the current low enough for 10 m runs. Use 5V SPI where you need fine pixel resolution instead of long runs.

Is chasing tape suitable for stage, KTV, bar and event lighting?

It is the main use. DMX and SPI chasing runs sync to the lighting console for stage edges, bar fronts, KTV ceilings and event trussing, and the dot-free surface keeps close-range camera shots free of the LED dot pattern that ruins broadcast footage.

Frequently asked questions

What are the primary differences between the two SOB Chasing LED strip models?

The two SOB Chasing LED strip models primarily differ in power consumption and resulting luminous flux. One model operates at 10W/m, while the other is rated at 14.4W/m. Both maintain a CRI >90 and utilize the same 24V input, offering flexibility for various project requirements based on desired brightness and energy efficiency.

How is individual pixel control achieved with DENO LED's SOB Chasing LED strips?

Individual pixel control on DENO LED's SOB Chasing LED strips is achieved through an integrated driver IC per segment, allowing for independent addressability of each LED or small cluster of LEDs. This enables the creation of complex chasing, flowing, and animated lighting sequences using compatible control systems and protocols, such as SPI or DMX.

What are the recommended maximum run lengths for these 24V SOB Chasing LED strips to avoid voltage drop?

Recommended maximum run lengths for 24V SOB Chasing LED strips depend on the specific model's wattage per meter and the wire gauge used. For optimal performance and to mitigate voltage drop, it is generally advised to limit continuous runs to 5 meters. Longer installations require power injection at intermediate points or a parallel wiring scheme from the power supply.

Can DENO LED provide custom lengths or specific IP ratings for the SOB Chasing LED strip for OEM projects?

Yes, DENO LED offers customization for OEM projects, including specific cut lengths and various IP ratings for the SOB Chasing LED strip. As an OEM/ODM manufacturer, we can tailor products to meet project-specific requirements, from custom reel lengths to enhanced waterproofing (e.g., IP65, IP67, IP68) and specialized connectors, subject to minimum order quantities.