DENO LED Lighting

10mm COB LED Strip — 360–840 LEDs/m, 24V Dot-Free

DENO LED's 10mm COB LED strip family offers eight single-color models, designed for consistent, dot-free illumination. These 24V strips feature power densities ranging from 5W/m to 15W/m, with a high CRI of 90+ for accurate color rendering. Available in IP20 and IP65 ratings, they are suitable for various indoor and protected outdoor architectural lighting applications, including cove lighting, under-cabinet illumination, and display cases, where a uniform light line is critical. Custom OEM lengths are available to meet specific project requirements.

10mm Single-Color models & key specifications (8)

48V 10mm Single-Color Models (1)

480d-L30 — COB · 480 LEDs/m · 48V

480d-L30 10mm Single-Color — 48V, cuttable every 50mm, 10mm FPCB width, COB LEDs, 480 LEDs/m

LED Type: COB · LED Density: 480 · Voltage: 48V · Cutting Unit: 50mm · PCB Width: 10 · Copper Foil: 1.3oz · Circuit Type: CC

24V 10mm Single-Color Models (7)

360-W — COB · 360 LEDs/m · 24V

360-W 10mm Single-Color — 24V, cuttable every 50mm, 10mm FPCB width, COB LEDs, 360 LEDs/m

LED Type: COB · LED Density: 360 · Voltage: 24V · Cutting Unit: 18LEDs/50mm · PCB Width: 10 · Copper Foil: 1.3oz · Circuit Type: CV

360-R — COB · 360 LEDs/m · 24V

360-R 10mm Single-Color — 24V, cuttable every 50mm, 10mm FPCB width, COB LEDs, 360 LEDs/m

LED Type: COB · LED Density: 360 · Voltage: 24V · Cutting Unit: 50mm · PCB Width: 10 · Copper Foil: 1.3oz · Circuit Type: CV

528-10-24V — COB · 528 LEDs/m · 24V

528-10-24V 10mm Single-Color — 24V, cuttable every 45.5mm, 10mm FPCB width, COB LEDs, 528 LEDs/m

LED Type: COB · LED Density: 528 · Voltage: 24V · Cutting Unit: 45.45mm · PCB Width: 10 · Copper Foil: 1.3oz · Circuit Type: CV

6701 — COB · 378 LEDs/m · 24V

6701 10mm Single-Color — 24V, cuttable every 55.6mm, 10mm FPCB width, COB LEDs, 378 LEDs/m, IP20

LED Type: COB · LED Density: 378 · Voltage: 24V · Cutting Unit: 55.55mm · PCB Width: 10 · Copper Foil: 1.3oz · Circuit Type: CV · IP Rating: IP20

360-B — COB · 360 LEDs/m · 24V

360-B 10mm Single-Color — 24V, cuttable every 50mm, 10mm FPCB width, COB LEDs, 360 LEDs/m

LED Type: COB · LED Density: 360 · Voltage: 24V · Cutting Unit: 50mm · PCB Width: 10 · Copper Foil: 1.3oz · Circuit Type: CV

6702 — COB · 378 LEDs/m · 24V

6702 10mm Single-Color — 24V, cuttable every 55.6mm, 10mm FPCB width, COB LEDs, 378 LEDs/m

LED Type: COB · LED Density: 378 · Voltage: 24V · Cutting Unit: 55.55mm · PCB Width: 10 · Copper Foil: 1.3oz · Circuit Type: CV

360-G — COB · 360 LEDs/m · 24V

360-G 10mm Single-Color — 24V, cuttable every 50mm, 10mm FPCB width, COB LEDs, 360 LEDs/m, IP20

LED Type: COB · LED Density: 360 · Voltage: 24V · Cutting Unit: 50mm · PCB Width: 10 · Copper Foil: 1.3oz · Circuit Type: CV · IP Rating: IP20

10mm COB LED Strip — Buyer Questions

What is a 10mm COB LED strip used for?

The 10 mm board is the workhorse 24V COB LED strip: wide enough for 480, 528 or 576 LEDs/m and for the copper needed at 8–12W/m, and still a fit for standard 12 mm inner-width aluminium profile. It is the default for cove, ceiling perimeter and corridor lines up to about 5 m per feed.

How many LEDs per metre does a 24V COB LED strip have?

DENO 24V COB tape is built at 360, 480, 528 and 576 LEDs/m. Higher density means a shorter cut unit and a smoother line at close range; it does not by itself mean more light, because wattage per metre is set by the drive current. Ask for the lm/m figure, not just the LED count.

How long can a 10mm 24V COB LED strip run from one power feed?

About 5 m at 24V on a single feed and 10 m fed from both ends before the tail dims visibly. The 48V 480 LEDs/m build extends a single run to roughly 10–12 m, and constant-current SOB boards go to 15 m from one feed if the layout cannot take a mid-feed.

Does a 10mm COB LED strip need a heat sink?

Above roughly 8W/m, yes — mount it in aluminium profile. The continuous phosphor line spreads heat better than discrete SMD packages, but a 12W/m run taped to plasterboard will lose lumens and shift colour over time. Aluminium channel typically buys 10–15°C of junction temperature.

What cutting unit does the 10mm COB LED strip have?

Between 27.8 mm and 50 mm depending on density and voltage — the 24V 576 LEDs/m board cuts every 27.8 mm, the 528 LEDs/m board every 45.45 mm and the 360 LEDs/m board every 50 mm. Always design joinery around the cut unit, since the shortest piece you can power equals one unit.

Frequently asked questions

What are the available power and color temperature options for the 10mm COB LED strip models?

The 10mm COB LED strip family offers power densities from 5W/m to 15W/m, all operating at 24V. Standard color temperatures include 2700K, 3000K, 4000K, and 6000K, with custom options available upon request. All models maintain a CRI of 90+ and utilize 1 SDCM binning for color consistency.

What are the maximum recommended run lengths for the 10mm COB LED strips to avoid significant voltage drop?

The maximum recommended run lengths for DENO LED's 10mm COB LED strips depend on the specific wattage per meter. For optimal performance and minimal voltage drop (typically below 5%), consult the product datasheets for each model's specified maximum run. Generally, higher wattage strips will have shorter maximum runs.

Can these 10mm COB LED strips be cut to custom lengths, and what is the minimum cutting unit?

Yes, DENO LED's 10mm COB LED strips are designed for field customization. The minimum cutting unit for these 24V strips is typically 50mm, allowing for precise length adjustments to fit various installation requirements. Cutting marks are clearly indicated on the FPCB.

What certifications do these 10mm COB LED strip products hold, ensuring compliance for international projects?

DENO LED's 10mm COB LED strip products are manufactured to meet international quality and safety standards. They hold CE, UL, and RoHS certifications. These certifications ensure compliance with European safety, environmental, and North American electrical safety requirements, facilitating global project integration.