RGB COB LED Strip — Dot-Free Colour Changing 24V
DENO LED's RGB SCOB LED Strip offers dynamic color control with a dot-free, uniform light output, ideal for architectural accents, retail displays, and entertainment lighting. Utilizing advanced SCOB technology and 99.99% gold wire bonding, these strips provide high CRI and 1 SDCM binning for consistent color quality. Available in 24V, custom lengths, and various IP ratings, they are manufactured with electroplated roll-to-roll FPCB, ensuring durability and reliability for diverse B2B applications requiring precise color mixing and smooth illumination.
RGB LED Strips models & key specifications (1)
6704 — COB · 840 LEDs/m · 24V
LED Type: COB · LED Density: 840 · Voltage: 24V · Cutting Unit: 50mm · PCB Width: 10 · Copper Foil: 1.3oz · Circuit Type: CV
RGB LED Strip Lights — Buyer Questions
What is the difference between RGB and RGBW LED strip lights?
An RGB LED strip mixes red, green and blue dies to produce colour, and its 'white' is a mix that always carries a colour cast. RGBW LED strip lights add a dedicated white die — 2700K to 6500K, Ra 90+ — so the same run can deliver usable architectural white and saturated colour scenes without a second channel of tape.
- Series RGB LED strip lights series
- Related series RGBW LED strip lights with dedicated white channel
- Related series full spectrum LED strip for high-CRI white
Should I use a 12V or 24V RGB LED strip?
24V is the default for architectural work: at the same wattage it draws half the current of 12V, so a single feed covers 5–10 m without visible colour shift at the far end. 12V RGB LED strip is reserved for short cabinet, furniture and vehicle runs where the driver or controller is 12V-native.
- Series RGB LED strip lights series
- Guide check voltage drop on a 12V vs 24V RGB run
- Related series constant current RGB boards for long feeds
- Product 6704 24V RGB LED strip
Can an RGB LED strip be dot-free?
Yes, if the LED pitch is tight enough for the three dies to blend before the light leaves the diffuser. DENO builds high-density RGB boards at 2.1–4.2 mm pitch, which removes both the dot pattern and the rainbow fringing typical of 60 LEDs/m colour tape in shallow profiles.
Do you make an outdoor waterproof RGB LED strip?
Yes. RGB builds are available IP65 silicone-coated, IP67 sleeved and IP68 fully potted, plus DENO WAP™ conformal coating that stays clear and flexible instead of yellowing. Marine-grade variants add salt-spray resistant terminations for dock and yacht installations.
- Series RGB LED strip lights series
- Related series marine grade LED strip for outdoor colour runs
- Related series long-run outdoor LED strip layouts
How is an RGB LED strip controlled — DMX, DALI or a standard controller?
Common RGB tape is a 4-pin constant-voltage load, so it works with any PWM controller: standard RF/Wi-Fi controllers, 0–10V, DALI DT8 or DMX512 decoders. Choose a driver and decoder with at least 1 kHz PWM (16 kHz for camera-facing work) to keep the run flicker-free on video.
- Series RGB LED strip lights series
- Related series pixel addressable LED strip for per-LED control
- Guide flicker, Pst LM and SVM reference data
Can I order a custom RGB LED strip?
Yes — LED count, pitch, PCB width from 5 mm, copper weight, cut unit, IP class and connector type are all configurable, including RGB+CCT (five-channel) and mixed RGB/white layouts. DENO is a manufacturer, so a non-standard colour build is tooled from an existing FPCB stack-up rather than quoted as a new product line.
- Series RGB LED strip lights series
- Related series custom LED strip lights built to order
- Guide send an RGB LED strip specification to DENO