DENO LED Lighting

Automotive Ambient LED Strip | Car Interior Lighting | DENO

DENO automotive ambient LED strips cover car interior contour lighting for dashboards, door panels, centre consoles and seat backs. The series includes #D8018, a 5V SPI addressable side-emitting RGB strip for flowing colour effects, and three 9mm, 140 LEDs/m single-colour strips: #14047 (5V), #14046 (12V) and #14045 (24V), which can be cut at any LED. Manufactured by DENO in Foshan, China, for B2B and OEM/ODM projects.

Automotive Ambient LED Strip for Car Interior Contour Lighting

Slim side-emitting and top-emitting LED strips for dashboard, door-panel, centre-console and seat-back contour lines. Choose dynamic 5V SPI addressable RGB for flowing colour, or single-colour white tape in 5V, 12V and 24V that can be cut at any LED. Images are concept renderings of typical installation zones, not photographs of a specific vehicle project.

Concept rendering of a dynamic RGB automotive ambient LED strip running along a car dashboard trim line and door panel, with close-ups of the contour glow beside leather stitching
Concept rendering of a dynamic RGB automotive ambient LED strip running along a car dashboard trim line and door panel, with close-ups of the contour glow beside leather stitching
Concept rendering of a cyan-to-amber gradient LED contour line around air vents, a car door handle panel and rear seat backs
Concept rendering of a cyan-to-amber gradient LED contour line around air vents, a car door handle panel and rear seat backs
Concept rendering of full-cabin car interior ambient lighting with LED contour lines on the dashboard, centre console, door panels and seat backs under a panoramic roof
Concept rendering of full-cabin car interior ambient lighting with LED contour lines on the dashboard, centre console, door panels and seat backs under a panoramic roof
Concept rendering of an automotive ambient LED strip framing the centre console, gear selector and front and rear door trims at dusk
Concept rendering of an automotive ambient LED strip framing the centre console, gear selector and front and rear door trims at dusk
  • 5V SPI dynamic RGB: #D8018 side-emitting addressable strip for flowing, chasing and gradient colour along trim lines.
  • 5V / 12V / 24V single colour: #14045, #14046 and #14047: 9mm, 140 LEDs/m white tape matched to USB, 12V and 24V vehicle supplies.
  • Cut at any LED: Single-colour models cut between every LED, so runs fit dashboard and door-trim lengths without dead ends.

Automotive LED Strip models & key specifications (4)

24V Automotive LED Strip Models (1)

14045 — 2216 · 140 LEDs/m · 24V

14045 Automotive LED Strip — 24V, cuttable every 7.1mm, 9mm FPCB width, 2216 LEDs, 140 LEDs/m, 2700–6500K

LED Type: 2216 · LED Density: 140 · CCT: 2700–6500K · CRI: Ra≥90 · Voltage: 24V · Cutting Unit: 1LED/7.142mm · PCB Width: 9 · Copper Foil: 2oz · Circuit Type: CV · IP Rating: IP20

12V Automotive LED Strip Models (1)

14046 — 2216 · 140 LEDs/m · 12V

14046 Automotive LED Strip — 12V, cuttable every 7.1mm, 9mm FPCB width, 2216 LEDs, 140 LEDs/m, 2700–6500K

LED Type: 2216 · LED Density: 140 · CCT: 2700–6500K · CRI: Ra≥90 · Voltage: 12V · Cutting Unit: 1LED/7.143mm · PCB Width: 9 · Copper Foil: 2oz · Circuit Type: CV · IP Rating: IP20

5V Automotive LED Strip Models (2)

D8018 — 0807 · 136 LEDs/m · 5V

D8018 Automotive LED Strip — 5V, cuttable every 7.4mm, 7.8mm FPCB width, 0807 LEDs, 136 LEDs/m, 2700-6500

LED Type: 0807 · LED Density: 136 · CCT: 2700-6500 · CRI: Ra≥80 · Voltage: 5V · Power: 4 W/m · Cutting Unit: 7.35mm · PCB Width: 7.8 · Circuit Type: CV · IP Rating: IP20

14047 — 2216 · 140 LEDs/m · 5V

14047 Automotive LED Strip — 5V, cuttable every 7.1mm, 9mm FPCB width, 2216 LEDs, 140 LEDs/m, 2700–6500K

LED Type: 2216 · LED Density: 140 · CCT: 2700–6500K · CRI: Ra≥90 · Voltage: 5V · Cutting Unit: 1LED/7.142mm · PCB Width: 9 · Copper Foil: 2oz · Circuit Type: CV · IP Rating: IP20

Other Dynamic & Ambient Lighting series

Frequently asked questions

Which voltages are available for automotive ambient LED strips?

The series covers 5V (#D8018 dynamic RGB and #14047 single colour), 12V (#14046) and 24V (#14045).

Is there a dynamic colour-changing option?

Yes. #D8018 is a 5V SPI addressable side-emitting RGB strip for flowing, chasing and gradient effects driven by an SPI controller.

Can the single-colour strips be cut to fit trim lengths?

Yes. #14045, #14046 and #14047 can be cut at any LED, so runs can match dashboard and door-trim lengths.

Are the gallery images real vehicle projects?

No. The gallery images are concept renderings showing typical installation zones; contact DENO for samples and project-specific specifications.