RGBW LED Light Sheet 480x240mm (#16795)
24V · 98 LEDs · 34.3mm Cut
Model: 16795
Description
The #16795 RGBW LED light sheet is the low-density, energy-conscious option in the FlexLite RGBW range: 480x240mm, 24V DC, 98 5050 RGBW LEDs on a 34.286mm pitch, 12-26.8W, cut every 7 LEDs (34.286x240mm). With under 27W at full output it lights large backlit areas at a fraction of the load of a high-density sheet, which matters when dozens of panels share one driver or when the installation runs all day. RGBW gives a dedicated white die alongside the colour channels, so a signage box or feature wall can sit on clean white most of the time and switch to colour for promotions. The 120 degree beam and 2oz copper FPCB keep the illumination even across the sheet; increase the diffuser gap slightly compared with the 288-LED version to eliminate any hot spots. Typical applications are large-area backlighting, ceiling and cove details, retail displays and budget-sensitive colour installations. IP20 standard, dimmable, up to 4 sheets per single-end feed.
Specifications
| LED QTY | 98 LEDs/pcs |
|---|---|
| PART NO | DL-F50A98V24-16795-* |
| SMD TYPE | 5050 |
| CUTTABLE UNIT | 7LEDs/34.286*240mm |
| DIMMABLE | Yes |
| IP RATING | IP20 |
| LED PITCH | 34.286mm |
| LIFESPAN | 50000 |
| PCB WIDTH | 240x480mm |
| WARRANTY | 5 Years |
| BEAM ANGLE | 120° |
| LENGTH MAX | 4pcs |
| COPPER FOIL | 2oz |
| POWER RANGE | 12~26.8W |
| CIRCUIT TYPE | C.V. |
| INPUT VOLTAGE | DC 24V |
| OPERATING TEMPERATURE | -25~40°C;Tc：75°C（max） |
RGBW LED Sheet — Buyer Questions
What is the difference between an RGBW and an RGBWW LED sheet?
RGBW adds one white die to the RGB mix; RGBWW (the 5-in-1 #6432) adds warm and cool white, so the white channel itself tunes from about 2700 K to 6500 K. The 5-in-1 also puts all five dies in a single chip, which removes the colour fringing you see from separate dies at short diffuser distances.
- Series RGBW LED Sheet series
- Product 6432 RGBWW LED sheet
Which RGBW LED sheet density should I specify?
98 LEDs (#16795) for low-load, large-area work with 30–40 mm of diffuser depth; 162 LEDs (#16796) when you need two-axis cutting to shape the sheet around fixtures; 288 LEDs (#16797) on a 19.91 mm pitch when the cabinet is shallow and the surface is viewed close up.
- Series RGBW LED Sheet series
- Product 16796 RGBW sheet density
Why choose RGBW over RGB for backlit signage?
Because most signs display white most of the time. An RGB mix always carries a colour cast and burns all three channels to make it; the dedicated white die gives a clean, colour-correct white at lower power, while the colour channels stay free for seasonal or promotional scenes.
- Series RGBW LED Sheet series
- Related series RGB LED sheet alternative
- Product 16797 RGBW signage sheet
Can an RGBW LED sheet be cut in two directions?
The #16796 can: its 53.3 × 80 mm grid allows cuts across and along the sheet, so it can be shaped around bar backs, curved fixtures and display niches instead of being masked off. The other RGBW sheets cut on a single axis at 34.3 mm or 120 mm intervals.
- Series RGBW LED Sheet series
- Related series cuttable LED sheet grid
Tested lightbox depth, cutting precision and efficacy — all 10 LED sheets compared
Three numbers decide whether an LED sheet works in your cabinet: the diffuser depth it needs before the dots disappear, the smallest piece you can cut without losing a channel, and the load it puts on the driver. The table below lists all ten DENO FlexLite sheets against those three measured figures so a shallow stone lightbox, an irregular logo or a low-load SEG frame can be specified in one pass.
| Model | Family / grid | LED pitch | Tested lightbox depth | Cutting precision | Load / efficacy |
|---|---|---|---|---|---|
| #6433 | Single colour — 288 × 2835 | 20 mm | 15–25 mm | 1 LED — 20 × 20 mm, both axes | 20–138 W per sheet |
| #6600 | Tunable white 2700–6500 K — 576 × 2835 | 20 mm | 15–25 mm | 2 LEDs — 20 × 20 mm, both axes | 20–120 W per sheet · 234.8 lm/W peak |
| #6352 | RGB — 288 × 5050 | 20 mm | 15–25 mm | 12 LEDs — every 20 mm, one axis | 17.2–70 W per sheet |
| #17947 | RGB — 162 × 5050 | 26.7 mm | 30 mm and deeper | 6 LEDs — every 53.3 mm, one axis | Lower current than #6352 at the same voltage |
| #16797 | RGBW — 288 × 5050 | 19.9 mm | 15–25 mm | 12 LEDs — every 120 mm, one axis | Highest RGBW density in the range |
| #16796 | RGBW — 162 × 5050 | 26.7 mm | 30 mm and deeper | 6 LEDs — 53.3 × 80 mm, both axes | 13–50 W per sheet |
| #16795 (this page) | RGBW — 98 × 5050 | 34.3 mm | 30–40 mm | 7 LEDs — 34.3 × 240 mm, one axis | 12–26.8 W per sheet — lowest load of the bare-emitter grids |
| #6432 | RGBWW 5-in-1 — 288 × 5050 | 20 mm | 20–40 mm | 12 LEDs — 20 × 240 mm, one axis | 20–110 W per sheet |
| #6105 | Wide-angle lens, 24 V — 50 × 2835, 160° lens | 48 mm | 40–60 mm | 1 LED — 48 × 48 mm, both axes | 12–60 W per sheet — 50 LEDs cover the full sheet |
| #6710 | Wide-angle lens, 12 V — 50 × 6060, 160° lens | 48 mm | 40–60 mm | 1 LED — 48 × 48 mm, both axes | 10–60 W per sheet at 12 V |
- Diffuser depth is the air gap measured between the LED sheet and opal acrylic in our lightbox rig; a translucent stone slab counts its own thickness towards that gap.
- Cutting precision is the smallest complete unit that keeps every colour channel intact — always cut on the printed line so the reconnection pads survive.
- Plan four sheets from a single-end feed and eight with dual-end input, then size the driver at the sheet's maximum wattage plus 30 % headroom.