RGB LED Sheet 480x240mm (#6352)
24V · 288 LEDs · Cuttable Every 20mm
Model: 6352
Description
The #6352 RGB LED sheet is a 480x240mm flexible LED light sheet carrying 288 5050 RGB LEDs on a 2oz copper FPCB, driven at 24V DC with a 17.2-70W power window. Because every LED sits on a 20mm pitch, the sheet can be cut every 12 LEDs (20x240mm) and tiled into large rectangles, so a stage backdrop, exhibition wall or architectural facade panel can be built to size without custom tooling. The dense 20mm pitch is what keeps colour mixing even: at normal diffuser distances there are no visible colour blocks or dots, only a continuous wash. Typical uses are RGB backlight sheets behind translucent panels, bar and club feature walls, retail window graphics and event scenery that has to change colour on cue. The sheet is dimmable and works with standard constant-voltage RGB controllers, including DMX gateways where a show-control protocol is required. Up to 4 sheets can run from a single feed (8 with dual-end input). DENO manufactures every FlexLite LED sheet in-house, so cut unit, connector position, lead-out length and IP treatment can all be customised for OEM/ODM orders.
Specifications
| LED QTY | 288 LEDs/pcs |
|---|---|
| PART NO | DL-F50A288V24-6352-* |
| SMD TYPE | 5050 |
| CUTTABLE UNIT | 12LEDs/20*240mm |
| DIMMABLE | Yes |
| LED PITCH | 20mm |
| LIFESPAN | 50000 |
| PCB WIDTH | 240x480mm |
| WARRANTY | 5 Years |
| LENGTH MAX | 4pcs |
| COPPER FOIL | 2oz |
| POWER RANGE | 17.2~70W |
| CIRCUIT TYPE | C.V. |
| INPUT VOLTAGE | DC 24V |
| OPERATING TEMPERATURE | -25~40°C;Tc：75°C（max） |
RGB LED Sheet — Buyer Questions
What is an RGB LED sheet used for?
Stage and event backdrops, exhibition walls, colour-changing signage and architectural feature panels — anywhere a whole surface has to change colour rather than a line of tape. Sheets tile edge to edge, so a 480×240 mm module scales to any rectangle.
- Series RGB LED Sheet series
- Product 17947 RGB LED sheet
Should I choose the 288-LED or 162-LED RGB sheet?
The 288-LED #6352 sits on a 20 mm pitch and blends within a 15–25 mm diffuser gap — the right pick for shallow cabinets and close viewing. The 162-LED #17947 costs less and draws less current on a 53.3 mm pitch; specify it when you have 30 mm or more of depth behind the diffuser.
- Series RGB LED Sheet series
Which controller drives an RGB LED sheet?
Any 24 V constant-voltage RGB controller: PWM, RF, Wi-Fi, DMX512 decoders and SPI gateways for show control. Match the controller's per-channel current to the connected load — up to 70 W per #6352 sheet.
- Series RGB LED Sheet series
- Guide calculate total sheet load
Will an RGB LED sheet show visible dots through the diffuser?
Not when the diffuser distance matches the LED pitch. At 20 mm pitch, 15–25 mm behind opal acrylic gives a continuous colour wash. Cut that gap in half and the individual dies start to read as dots, which is the single most common cause of a patchy colour wall.
- Series RGB LED Sheet series
- Related series dot-free LED sheet backlighting
Tested lightbox depth, cutting precision and efficacy — all 10 LED sheets compared
Three numbers decide whether an LED sheet works in your cabinet: the diffuser depth it needs before the dots disappear, the smallest piece you can cut without losing a channel, and the load it puts on the driver. The table below lists all ten DENO FlexLite sheets against those three measured figures so a shallow stone lightbox, an irregular logo or a low-load SEG frame can be specified in one pass.
| Model | Family / grid | LED pitch | Tested lightbox depth | Cutting precision | Load / efficacy |
|---|---|---|---|---|---|
| #6433 | Single colour — 288 × 2835 | 20 mm | 15–25 mm | 1 LED — 20 × 20 mm, both axes | 20–138 W per sheet |
| #6600 | Tunable white 2700–6500 K — 576 × 2835 | 20 mm | 15–25 mm | 2 LEDs — 20 × 20 mm, both axes | 20–120 W per sheet · 234.8 lm/W peak |
| #6352 (this page) | RGB — 288 × 5050 | 20 mm | 15–25 mm | 12 LEDs — every 20 mm, one axis | 17.2–70 W per sheet |
| #17947 | RGB — 162 × 5050 | 26.7 mm | 30 mm and deeper | 6 LEDs — every 53.3 mm, one axis | Lower current than #6352 at the same voltage |
| #16797 | RGBW — 288 × 5050 | 19.9 mm | 15–25 mm | 12 LEDs — every 120 mm, one axis | Highest RGBW density in the range |
| #16796 | RGBW — 162 × 5050 | 26.7 mm | 30 mm and deeper | 6 LEDs — 53.3 × 80 mm, both axes | 13–50 W per sheet |
| #16795 | RGBW — 98 × 5050 | 34.3 mm | 30–40 mm | 7 LEDs — 34.3 × 240 mm, one axis | 12–26.8 W per sheet — lowest load of the bare-emitter grids |
| #6432 | RGBWW 5-in-1 — 288 × 5050 | 20 mm | 20–40 mm | 12 LEDs — 20 × 240 mm, one axis | 20–110 W per sheet |
| #6105 | Wide-angle lens, 24 V — 50 × 2835, 160° lens | 48 mm | 40–60 mm | 1 LED — 48 × 48 mm, both axes | 12–60 W per sheet — 50 LEDs cover the full sheet |
| #6710 | Wide-angle lens, 12 V — 50 × 6060, 160° lens | 48 mm | 40–60 mm | 1 LED — 48 × 48 mm, both axes | 10–60 W per sheet at 12 V |
- Diffuser depth is the air gap measured between the LED sheet and opal acrylic in our lightbox rig; a translucent stone slab counts its own thickness towards that gap.
- Cutting precision is the smallest complete unit that keeps every colour channel intact — always cut on the printed line so the reconnection pads survive.
- Plan four sheets from a single-end feed and eight with dual-end input, then size the driver at the sheet's maximum wattage plus 30 % headroom.