DENO LED Lighting

Wide PCB LED Strips - Brightest High Lumen Builds | Brightest High Lumen Output | DENO

DENO wide PCB LED strip boards run from 18mm to 64mm and carry two, three or four parallel LED rows — up to 960 LEDs/m and 45W/m. The extra board area is both an optical and a thermal advantage: more emitters per metre make these the brightest, highest lumen builds in the catalogue, while 2oz to 3oz copper spreads the heat a high power LED strip generates so lumen maintenance holds over the warranty period. Standard builds are 24V and 48V for long single feeds, with IP20, IP65, IP67 and IP68 options plus DENO WAP conformal coating for outdoor work. Board width, row count, LED density, CCT, CRI, cut unit and connector are configurable for OEM projects.

Wide PCB LED Strips models & key specifications (11)

48V Wide PCB LED Strip (2)

2 models, 2835 package, 256–280 LEDs/m, 20 mm boards. Powered from a 48V DC supply: 48v led strip lighting for 48 V drivers for long-span facade, corridor and warehouse runs with minimal voltage drop.

19810 — 2835 · 280 LEDs/m · 48V

19810 wide pcb led strip — 48V, cuttable every 50mm, 20mm FPCB width, 2835 LEDs, 280 LEDs/m

LED Type: 2835 · LED Density: 280 · Voltage: DC 48V · Power: 4.8~38W · Cutting Unit: 14LEDs/50mm · PCB Width: 20mm · Copper Foil: 3oz · Circuit Type: CC

17510 — 2835 · 256 LEDs/m · 48V

17510 wide pcb led strip — 48V, cuttable every 62.5mm, 20mm FPCB width, 2835 LEDs, 256 LEDs/m

LED Type: 2835 · LED Density: 256 · Voltage: DC 48V · Power: 3.8~40W · Cutting Unit: 16LEDs/62.5mm · PCB Width: 20 · Copper Foil: 3oz · Circuit Type: C.V.

24V High Lumen LED Strip (9)

9 models, 2835 / 3030 / 5630 packages, 18–960 LEDs/m, 15–64 mm boards. Powered from a 24V DC supply: 24v led strip lighting for standard 24 V constant-voltage drivers for cove, linear architectural and joinery runs.

16702 — 2835 · 320 LEDs/m · 24V

16702 wide pcb led strip — 24V, cuttable every 50mm, 18mm FPCB width, 2835 LEDs, 320 LEDs/m

LED Type: 2835 · LED Density: 320 · Voltage: DC 24V · Cutting Unit: 16LEDs/50mm · PCB Width: 18 · Copper Foil: 3oz · Circuit Type: C.V.

5871 — 2835 · 256 LEDs/m · 24V

5871 wide pcb led strip — 24V, cuttable every 31.3mm, 20mm FPCB width, 2835 LEDs, 256 LEDs/m

LED Type: 2835 · LED Density: 256 LEDs/m · Voltage: DC 24V · Power: 5~46W · Cutting Unit: 8LEDs/31.25mm · PCB Width: 20mm · Copper Foil: 3oz · Circuit Type: C.V.

16705 — 2835 · 960 LEDs/m · 24V

16705 wide pcb led strip — 24V, cuttable every 33.3mm, 64mm FPCB width, 2835 LEDs, 960 LEDs/m

LED Type: 2835 · LED Density: 960 LEDs/m · Voltage: DC 24V · Cutting Unit: 32LEDs/33.333mm · PCB Width: 64 · Copper Foil: 3oz · Circuit Type: C.V.

10461 — 3030 · 18 LEDs/m · 24V

10461 wide pcb led strip — 24V, cuttable every 166.7mm, 24mm FPCB width, 3030 LEDs, 18 LEDs/m, IP20

LED Type: 3030 · LED Density: 18 · Voltage: 24V · Cutting Unit: 3LEDs/166.66mm · PCB Width: 24 · Copper Foil: 2oz · Circuit Type: CC · IP Rating: IP20

16700 — 2835 · 640 LEDs/m · 24V

16700 wide pcb led strip — 24V, cuttable every 50mm, 64mm FPCB width, 2835 LEDs, 640 LEDs/m

LED Type: 2835 · LED Density: 640 · Voltage: 24V · Cutting Unit: 32LEDs/50mm · PCB Width: 64mm · Copper Foil: 3 oz · Circuit Type: CV

16706 — 2835 · 720 LEDs/m · 24V

16706 wide pcb led strip — 24V, cuttable every 33.3mm, 36mm FPCB width, 2835 LEDs, 720 LEDs/m

LED Type: 2835 · LED Density: 720 LEDs/m · Voltage: 24V · Cutting Unit: 24LEDs/33.333mm · PCB Width: 36mm · Copper Foil: 3oz · Circuit Type: C.V.

5871-FS — 2835 · 256 LEDs/m · 24V

5871-FS wide pcb led strip — 24V, cuttable every 31.3mm, 20mm FPCB width, 2835 LEDs, 256 LEDs/m

LED Type: 2835 · LED Density: 256 · Voltage: DC 24V · Power: 3.8~46W · Cutting Unit: 8LEDs/31.25mm · PCB Width: 20 · Copper Foil: 3oz · Circuit Type: CV

16701 — 2835 · 480 LEDs/m · 24V

16701 wide pcb led strip — 24V, cuttable every 50mm, 36mm FPCB width, 2835 LEDs, 480 LEDs/m

LED Type: 2835 · LED Density: 480 · Voltage: DC 24V · Cutting Unit: 24LEDs/50mm · PCB Width: 36 · Copper Foil: 3oz · Circuit Type: C.V.

2771 — 5630 · 240 LEDs/m · 24V

2771 wide pcb led strip — 24V, cuttable every 50mm, 15mm FPCB width, 5630 LEDs, 240 LEDs/m, 2700-6500

LED Type: 5630 · LED Density: 240 · CCT: 2700-6500 · CRI: Ra≥80 · Voltage: 24V · Power: 12~28.8W · Cutting Unit: 12LEDs/50mm · PCB Width: 15 · Copper Foil: 3oz · Circuit Type: CV · IP Rating: IP20

Wide PCB LED Strip — Brightest, High Lumen Builds

Why is a wide PCB LED strip the brightest LED strip option?

Brightness is limited by how many dies fit per metre and how much heat the board can shed. A wide PCB LED strip — 18 mm, 20 mm, 36 mm or 64 mm instead of the usual 8–10 mm — carries two, three or four parallel LED rows, up to 960 LEDs/m, and roughly the same multiple of copper area. That is why DENO's widest boards are the brightest LED strip builds in the catalogue: more emitters and enough 2 oz copper to keep junction temperature down at full drive.

How many lumens per metre does a high lumen LED strip deliver?

A standard 10 mm single-row board tops out near 2,000 lm/m. DENO's multi-row wide boards run from roughly 3,000 lm/m on a two-row 18 mm build to over 8,000 lm/m on a four-row 64 mm build at 45 W/m. When a specification asks for a high lumen LED strip in lux rather than watts, size it from the target illuminance and mounting distance first, then pick the board width that reaches it without over-driving the dies.

How much power does a high power LED strip need, and how is the heat handled?

Wide multi-row builds run 16 W/m to 45 W/m, so a 5 m reel can draw over 200 W — size the driver with 20% headroom and feed it from both ends or mid-feed. Thermally, the wide board is the heat sink: the extra copper spreads flux along the strip, and mounting a high power LED strip in an aluminium profile rather than on plasterboard keeps the LEDs inside their rated case temperature and protects lumen maintenance.

Are there super bright LED strip lights in 12V, and when should I use 24V or 48V instead?

12V super bright LED strip lights exist but are limited to short runs: at 20 W/m a 12V board pulls 1.7 A per metre, so voltage drop dims the far end after 2–3 m. For architectural work DENO builds the wide boards in 24V and 48V, where the same wattage draws half or a quarter of the current and one feed covers 5–15 m. Where the fixture is 12V-native, keep the run short and feed each section separately.

Do you make super bright LED strip lights that are waterproof for outdoor use?

Yes. Every wide board is available IP65 silicone-coated, IP67 sleeved or IP68 fully potted, plus DENO WAP™ conformal coating that stays clear instead of yellowing under UV. For the brightest outdoor LED strip lights, remember the coating adds thermal resistance: outdoor high-output builds use 2–3 oz copper and are specified one drive step below the same board indoors so lumen maintenance holds over the warranty period.

Which is brighter — a wide multi-row board or a high-density single row?

For raw output, the wide multi-row board wins: rows multiply the flux while a single row is capped by LED pitch. For a dot-free line in a shallow reveal, high density wins. The two are combined on DENO's 36 mm and 64 mm boards, which run three or four dense rows at once, giving both an ultra bright LED strip face and an even luminance across the diffuser.

Can I order a custom width bright white LED strip?

Yes — board width, row count, LED density, CCT and CRI, copper weight, cut unit, IP class and connector are all configurable. Bright white LED strip lights are usually specified 4000K–6500K at Ra 90+ for workshops, cold rooms and signage; DENO tools these on the existing wide FPCB stack-ups, so a non-standard width is a production setup rather than a new product line.

Frequently asked questions

What are the primary benefits of using a wide PCB LED strip compared to standard narrow strips?

Wide PCB LED strips offer improved thermal dissipation due to increased copper surface area, leading to enhanced longevity and stability of the LEDs. They also provide greater mechanical rigidity, simplifying handling and installation, and can accommodate larger components or more parallel traces for reduced voltage drop over longer runs.

What are the typical voltage and wattage options available for wide PCB LED strips, and how do they impact design?

DENO LED offers wide PCB LED strips primarily in 12V and 24V options. 24V systems are generally preferred for longer runs due to reduced voltage drop. Wattage per meter varies significantly by model, typically from 4.8W/m for accent lighting to 24W/m for high-output applications. This impacts power supply selection and heat management requirements.

Can wide PCB LED strips be customized for specific lengths or color temperatures?

Yes, DENO LED provides OEM/ODM services for wide PCB LED strips, allowing for custom lengths, specific color temperatures (CCT), and CRI requirements. We utilize 1 SDCM binning for consistent CCT and offer high CRI options (Ra>90, Ra>95) to meet precise project specifications. Minimum order quantities may apply for custom configurations.

What considerations are important for ensuring proper thermal management and longevity with wide PCB LED strips?

Even with wider PCBs, proper thermal management is crucial. Always install wide PCB LED strips in an aluminum profile or on a heat-dissipating surface to prevent overheating. Adequate airflow around the strip and profile is also recommended, especially for higher wattage models, to maintain optimal operating temperatures and ensure rated lifespan.

Why use a wide LED strip PCB?

A 15 or 20 mm LED strip gives more copper area, so it dissipates heat better and carries more current. That is what allows high power builds above 25 W/m to run cooler, keep lumen maintenance high and support longer single feeds than a narrow board.