DENO LED Lighting

Ultra-Long SOB Strip Constant Current (#15904)

10mm · 24V · 280LEDs · 25mm/cut

Model: 15904

15904 Ultra-Long SOB Strip Constant Current | 10mm | 24V | 280LEDs | 25mm/cut | #15904 — 24V, cuttable every 25mm, 10mm FPCB width, SOB LEDs, 280 LEDs/m

Overview

The DENO LED Model 15904 Ultra-Long SOB Strip C.C. is engineered for unparalleled extended lighting solutions, boasting a maximum continuous length of 10 meters from a single power feed. Featuring 280 LEDs/m and a 24V constant current design with IC regulation, it ensures consistent brightness and superior heat dissipation thanks to its thicker PCB. It's ideally suited for architectural linear lighting, coves, and display cases in commercial and hospitality settings, offeri...

Description

SOB long run LED strip — 24V DC, 280 LEDs/m under a continuous phosphor layer on a 10mm, 3 oz copper board, cuttable every 25mm, constant-current circuit. Buyer decision: dot-free SOB light plus CC regulation — 10 m (32.8 ft) on one feed, 20 m on two, with both brightness and the seamless line held uniform end to end. For long, exposed runs where no diffuser profile is planned. Custom CCT, IP and length — request a factory quote.

Specifications

LED QTY280 LEDs/m
PART NODL-FSOBA140V24-15904-*
SMD TYPESOB
CUTTABLE UNIT7LEDs/25mm
DIMMABLEYes
LED PITCH3.572mm
PCB WIDTH10
BEAM ANGLE160°
LENGTH MAX10M
COPPER FOIL3oz
ON OFF TIMES10000(test times)
POWER RANGE4.8~14.4W
CIRCUIT TYPEC.C. (IC Regulated)
INPUT VOLTAGE24V
MIN BEND DIAMETERΦ60mm
OPERATING TEMPERATURE-25~40°C; Tc: 75°C (max)

Applications

  • Cove, wall-wash & perimeter lighting — Coves, recesses, wall-wash details and ceiling perimeters where a continuous, uniform line of light is required.
  • Showroom & hospitality display lighting — Shelving, display cases, reception desks and signage backlighting in shops, showrooms and hospitality spaces.
  • Kitchen & wardrobe under-cabinet lighting — Kitchen, wardrobe and furniture task lighting where the strip stays hidden and only the light is seen.

Request a quotation for #15904

DENO LED is a Shenzhen-based LED strip manufacturer with its own Foshan production base. Send the run length, voltage, CCT/CRI and IP rating you need and our engineering team replies with a specification sheet, wiring plan and price — OEM/ODM and fully custom builds included.

  • Warranty: 5 years
  • Compliance: CE · UL · RoHS
  • Bonding wire: 99.99% pure gold
  • Copper foil: 99.9% pure copper FPCB

Contact DENO LED engineers · OEM / ODM capability

Photometric Performance — CCT × CRI Efficacy Matrix

Peak measured luminous efficacy: 95.3 lm/W at 4000K, Ra 90, ErP energy class F (Grade DL (2nd Tier) · 9.6W/m).

All values are measured at the stated power density and ambient 25 °C, reported as luminous efficacy in lumens per watt (lm/W), luminous flux per metre (lm/m) and the corresponding EU ErP (2019/2015) energy class.

Grade DL (2nd Tier) · 9.6W/m

Grade DL (2nd Tier) · 9.6W/m — measured at 9.6 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)Ra 80 — Luminous Efficacy (lm/W)Ra 80 — Luminous Flux (lm/m)Ra 80 — ErP Energy ClassRa 90 — Luminous Efficacy (lm/W)Ra 90 — Luminous Flux (lm/m)Ra 90 — ErP Energy ClassFull Spectrum (Ra 95+) — Luminous Efficacy (lm/W)Full Spectrum (Ra 95+) — Luminous Flux (lm/m)Full Spectrum (Ra 95+) — ErP Energy Class
1800 K72.1 lm/W691.7 lm/mG
2300 K80.2 lm/W770.4 lm/mG
2700 K86.9 lm/W834.1 lm/mF
3000 K91.3 lm/W876.9 lm/mF
3500 K93 lm/W892.8 lm/mF
4000 K95.3 lm/W914.7 lm/mF
5000 K95.2 lm/W913.7 lm/mF
6500 K91.3 lm/W876.9 lm/mF

Grade DL (2nd Tier) · 12W/m

Grade DL (2nd Tier) · 12W/m — measured at 12 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)Ra 80 — Luminous Efficacy (lm/W)Ra 80 — Luminous Flux (lm/m)Ra 80 — ErP Energy ClassRa 90 — Luminous Efficacy (lm/W)Ra 90 — Luminous Flux (lm/m)Ra 90 — ErP Energy ClassFull Spectrum (Ra 95+) — Luminous Efficacy (lm/W)Full Spectrum (Ra 95+) — Luminous Flux (lm/m)Full Spectrum (Ra 95+) — ErP Energy Class
1800 K70.9 lm/W850.2 lm/mG
2300 K78.9 lm/W946.9 lm/mG
2700 K85.4 lm/W1025.1 lm/mF
3000 K89.8 lm/W1077.7 lm/mF
3500 K91.4 lm/W1097.3 lm/mF
4000 K93.7 lm/W1124.2 lm/mF
5000 K93.6 lm/W1123 lm/mF
6500 K89.8 lm/W1077.7 lm/mF

Grade DL (2nd Tier) · 14.4W/m

Grade DL (2nd Tier) · 14.4W/m — measured at 14.4 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)Ra 80 — Luminous Efficacy (lm/W)Ra 80 — Luminous Flux (lm/m)Ra 80 — ErP Energy ClassRa 90 — Luminous Efficacy (lm/W)Ra 90 — Luminous Flux (lm/m)Ra 90 — ErP Energy ClassFull Spectrum (Ra 95+) — Luminous Efficacy (lm/W)Full Spectrum (Ra 95+) — Luminous Flux (lm/m)Full Spectrum (Ra 95+) — ErP Energy Class
1800 K69.7 lm/W1003.2 lm/mG
2300 K77.6 lm/W1117.2 lm/mG
2700 K84 lm/W1209.6 lm/mG
3000 K88.3 lm/W1271.7 lm/mF
3500 K89.9 lm/W1294.8 lm/mF
4000 K92.1 lm/W1326.5 lm/mF
5000 K92 lm/W1325.1 lm/mF
6500 K88.3 lm/W1271.7 lm/mF

Related models in this series

See every model in SOB LED Strip Series or narrow to Sob Ultra Long. Compare wattage, lumen output and run length in the ProCalc parameter library, or request OEM/ODM pricing on the custom manufacturing page.

Frequently Asked Questions

What is the maximum continuous run length for this SOB LED strip?

This ultra-long LED strip features a special design allowing for a maximum continuous run of 10 meters with power fed from only one side, simplifying installation.

What are the key benefits of the SOB technology in this strip?

SOB (System-on-Board) technology ensures high bending reliability and a wider 180° beam angle, coupled with excellent flexibility and strong bending resistance for diverse applications.

Is this LED strip suitable for dimming, and what voltage does it require?

Yes, this LED strip is dimmable. It operates on a 24V input voltage with constant current (IC regulated) for stable performance.

Can this specific LED strip model be customized for higher power outputs?

Yes, while featuring built-in chip protection stents for higher power, special power requirements beyond the standard range are customizable upon request to DENO LED.

Is this SOB strip light also called FOB, S-COB or COB Pro strip light?

Yes. Model 15904 belongs to the DENO SOB (Spot on Board) family, which the market also calls FOB strip light, S-COB strip light or COB Pro strip light. All three names describe the same dot-free chip-on-board LED strip construction, so you can quote it under whichever term your project specification uses.

Why choose this S-COB strip light over a standard COB LED strip?

Compared with conventional COB LED strip, DENO SOB / FOB strip light supports higher power up to 24W/m instead of roughly 12W/m, CRI 95 and full-spectrum options, SDCM <=3 colour consistency, and single-end power feed at 5m, 10m and 15m without visible head-to-tail brightness loss, with higher luminous efficacy and lumen output.

Long Run COB LED Strip (SOB) — Buyer Questions

Does a constant current LED strip really have no brightness drop head to tail?

Each short segment carries its own current regulator, so it draws the current it needs regardless of the volt drop reaching it. Measured head to tail on a 15 m single-feed run the difference is a few percent — invisible on a cove line, unlike the 20–30% fall on unregulated tape.

Can I order 20m or 30m LED strip runs with no voltage drop?

Yes. 20 m and 30 m continuous installations are built either as a both-ends feed on 24V or as a single feed on 36V/48V. DENO supplies the reel cut to the exact run length so a corridor or façade line has no mid-run joint at all.

Why is a single-end powered LED strip 24V preferred on site?

One feed means one driver location, one cable pull and one point of maintenance. On refurbishment work where the ceiling is already closed at the far end, a single-end powered 15 m run is often the only practical option — and it removes the second driver from the cost plan.

Is an ultra long dot-free LED strip suitable for cove and architectural projects?

That is exactly what it is built for. Long continuous coves, atrium perimeters and façade lines need both an unbroken luminous line and stable brightness end to end; a dot-free constant-current board delivers both, and roll-to-roll production means no solder joints to fail inside a sealed cove.

SOB is the upgraded generation of the COB LED strip

Every SOB board on this page starts from the classic COB recipe — one continuous phosphor line, zero visible dots — and rebuilds it on flip-chip dies and thick copper. The result keeps the COB look but runs to 24W/m, holds CRI 95 and stays within SDCM ≤3 over the full reel. If your project is comfortable at 4–12W/m, the classic COB range remains the economical choice; if you need double the output or a 15 m single-feed run, you are already on the right page.