DENO LED Lighting

Selectable Power LED Strips | 3-in-1 & 6-in-1 24V | DENO

A selectable power LED strip carries several fixed wattages per metre on one 24V board; the level is chosen by which conductors are connected at installation. DENO builds 3-in-1 (7.2 / 10.2 / 21 W/m) and 6-in-1 (9.6–28.8 W/m) versions on a 10mm FPCB at 140 LEDs/m, so one reel covers office, hotel, retail and warehouse brightness targets and replaces three separate SKUs in stock.

Selectable Power LED Strips models & key specifications (2)

18631 — 2835 · 140 LEDs/m · 24V

18631 Selectable Power LED Strips — 24V, cuttable every 50mm, 10mm FPCB width, 2835 LEDs, 140 LEDs/m

LED Type: 2835 · LED Density: 140 LEDs/m · Voltage: DC 24V · Cutting Unit: 7LEDs/50mm · PCB Width: 10 · Copper Foil: 3oz · Circuit Type: C.C.

18367 — 2835 · 140 LEDs/m · 24V

18367 Selectable Power LED Strips — 24V, cuttable every 50mm, 10mm FPCB width, 2835 LEDs, 140 LEDs/m

LED Type: 2835 · LED Density: 140 LEDs/m · Voltage: 24V · Power: 9.6~28.8W · Cutting Unit: 7LEDs/50mm · PCB Width: 10mm · Copper Foil: 3oz · Circuit Type: C.V.

Selectable Power LED Strip — Buyer Questions

What is a selectable power LED strip?

A selectable power LED strip is one board that can be run at several fixed wattages per metre — DENO builds 3-in-1 versions at 7.2W, 10.2W and 21W/m and 6-in-1 versions from 9.6W up to 28.8W/m. The level is chosen at installation by which conductors are connected, so the same 24V SKU covers ambient cove light and bright accent light without changing product.

How do you change the wattage on an adjustable wattage LED strip?

By wiring, not by a dimmer. The FPCB carries parallel LED groups on separate conductors; connecting one, two or all of them at 24V sets the number of active groups and therefore the wattage per metre. No tools, no jumpers to cut and no controller are needed, and the choice is reversible if the project brief changes on site.

Does switching power levels shorten the life of the strip?

No. Each power level is a designed operating point, not an overdrive: drive current per die stays inside the LED's rated window at every step, and the 10 mm board with 2 oz copper is dimensioned for the highest level, so the lower levels simply run cooler. Lumen maintenance and the 5-year warranty apply to every selectable level.

Selectable power LED strip vs a dimmer — which should I specify?

A dimmer changes light output at runtime and costs efficacy, PWM depth and sometimes flicker performance; a selectable power LED strip sets the design brightness once, at full drive, with no control gear in the circuit. Most projects use both: pick the wattage level that matches the target lux, then dim from there for scene control.

Where is a multi power LED strip most useful?

Anywhere one specification must serve rooms with different targets: office ceilings and coves at the low level, hotel corridors and guestroom joinery in the middle, retail shelves, display cases and warehouse task lines at the top. Specifiers and distributors also stock a single reel instead of three, which cuts inventory and the risk of ordering the wrong wattage.

Can I order a custom field selectable LED strip?

Yes — the number of levels, the wattage of each level, LED density, CCT and CRI, PCB width, copper weight, cut unit, IP class and connector are all configurable. DENO is the manufacturer, so a 4-in-1 or 6-in-1 build with your own wattage ladder is tooled on the existing 24V stack-up rather than quoted as a new product line.

Frequently asked questions

What is a selectable power LED strip?

A selectable power LED strip is one board that can run at several fixed wattages per metre. DENO offers 3-in-1 (7.2W, 10.2W and 21W/m) and 6-in-1 (9.6W to 28.8W/m) 24V versions; the level is chosen at installation rather than at the factory.

How is the power level selected?

By wiring. The FPCB carries parallel LED groups on separate conductors, so connecting one, two or all of them at 24V sets how many groups are active and therefore the wattage per metre. No jumpers are cut and no controller is required.

Is an adjustable wattage LED strip the same as a dimmable strip?

No. A dimmer changes output at runtime and costs efficacy and PWM depth; a selectable power LED strip sets the design brightness once, at full drive. Both can be combined: choose the wattage level for the target lux, then dim for scene control.

Does switching levels affect lifetime or warranty?

No. Each level is a designed operating point with drive current inside the LED rating, and the 2 oz copper 10mm board is dimensioned for the highest level, so lower levels run cooler. The 5-year warranty applies at every selectable level.

Where are multi power LED strips typically used?

Projects where one specification must serve different lux targets: office ceilings and coves, hotel corridors and guestroom joinery, retail shelves and display cases, and warehouse task lighting.

Can DENO build a custom field selectable LED strip?

Yes. Number of levels, the wattage of each level, LED density, CCT and CRI, PCB width, copper weight, cut unit, IP class and connector are all configurable on the existing 24V stack-up as an OEM/ODM build.