Side Bend LED Neon Flex DL-T1225F (#DL-T1225F)
5V · 96 LEDs/m · 12x25mm
Model: DL-T1225F
Overview
The DENO LED DL-T1225F is a cutting-edge addressable neon LED strip, perfect for dynamic B2B lighting installations. Utilizing SMD5050 Tri-chip LEDs and SK6812 IC, it supports DMX512 signal and writable DMX addresses, allowing for intricate color-changing effects. With an impressive IP67 protection rating, this strip is durable for various environments. Each output can control up to 1024 pixels with DENO LED's specialized controller, offering vast customization. Ideal for a...
Description
DL-T1225F Adopts SMD5050 Tri-chip LED as its light source. SK6812 IC, DMX512 Signal Compatible,DMX Address Writable. By using our speciazed controller, each output can take 1024 pixels. Programmable to various color changing effects to cater to different applications. Easy to be installed, can be cut and reconnected(connection accessories available), Protection Rating IP67.
Specifications
| LED QTY | ≥ 96 LEDs/m |
|---|---|
| CUTTABLE UNIT | 1LED/10mm |
| DIMMABLE | Yes |
| LIFESPAN | 50000h |
| PCB WIDTH | 12mm |
| WARRANTY | 5 Years |
| BEAM ANGLE | 270° |
| LENGTH MAX | 5m |
| INPUT VOLTAGE | DC 5V |
| OPERATING TEMPERATURE | -25~40°C;Tc：75°C（max） |
Applications
- Channel letters & logo signage — Silicone neon holds a continuous glow line for logos, channel letters and wayfinding without visible LED dots.
- Facade & perimeter outlining — Flexible neon bends around building edges, balconies and columns to trace architecture at night.
- Bar fronts, headboards & stair nosings — Used along stair nosings, headboards and bar fronts where a soft, uniform tube of light is wanted instead of a hard strip.
Request a quotation for #DL-T1225F
DENO LED is a Shenzhen-based LED strip manufacturer with its own Foshan production base. Send the run length, voltage, CCT/CRI and IP rating you need and our engineering team replies with a specification sheet, wiring plan and price — OEM/ODM and fully custom builds included.
- Warranty: 5 years
- Compliance: CE · UL · RoHS
- Bonding wire: 99.99% pure gold
- Copper foil: 99.9% pure copper FPCB
How Side bending LED neon flex DL-T1225F performs on site
Specification notes for 12x25mm section 5V DC silicone neon: what it does outdoors, what it does around water, and how far it bends when you trace a building.
Outdoor & façade exposure
Specify for permanent exterior installation above the waterline (IP67).
The silicone is injection moulded onto the FPCB in one shot, so there is no glued cover to open up after a winter of thermal cycling — the failure mode PVC neon rope light shows in its second outdoor summer. UV-stabilised silicone keeps its colour instead of yellowing, and the body stays elastic from −30 °C to +80 °C, so a façade run installed in summer will not go brittle in a January frost. Feed with 5V DC and plan 5m per feed to hold end-of-run brightness across a long elevation.
- Sealed silicone body
- UV-stable silicone, −30 °C to +80 °C
- Low thermal load
Pools, spas & wet areas
Suitable for pool surrounds, spa ceilings and steam-adjacent joinery — not for submersion.
IP67 covers rain, splash, wash-down and steam — pool decks, shower reveals, sauna ceilings and spa coves — but the body is not intended to sit under water. Mount it above the waterline in an aluminium groove so condensate drains away from the feed joint, run 5V DC for wet-zone safety, and choose the IP68 variant where the channel can flood.
- IP67 — splash and rain, not submersion
- 5V DC
- Moulded end cap and feed joint
Architectural contour & signage
Bends horizontally, flat on the wall at about R60mm — the right pick for curved building contours, balcony bands, circular ceilings and racetrack coves.
Side bending LED neon flex takes its curve horizontally, flat on the wall, which is what decides whether a shape is possible without cutting and re-soldering. At about R60mm the outside of the curve stays evenly lit: 96 LEDs/m is matched to the diffuser depth so you read a continuous line of light rather than dots, even at 30 cm. Printed cut marks with indexed solder pads underneath let a sign maker shorten a letter stroke on site and re-seal it, and mounting clips, aluminium grooves and moulded bend grooves cover surface, recessed and free-form fixing.
- Cross-section 12x25mm
- Bend radius about R60mm
- 96 LEDs/m, dot-free
Frequently Asked Questions
What control systems are compatible with the DL-T1225F LED strip?
The DL-T1225F is compatible with DMX512 signal and features writable DMX addresses, working seamlessly with our specialized controllers for advanced effects.
What is the primary benefit of the IP67 rating for this product?
The IP67 rating ensures the DL-T1225F is highly protected against dust and water immersion, making it suitable for both indoor and demanding outdoor applications.
Can the DL-T1225F be customized for specific project lengths?
Yes, the strip is cuttable every 10mm (1 LED) and can be reconnected with available accessories, offering significant flexibility for custom lengths.
What is the expected lifespan and warranty for the DL-T1225F?
The DL-T1225F boasts a lifespan of 50,000 hours and comes with a robust 5-year warranty, ensuring long-term reliability for your investments.
What are the key specifications of #DL-T1225F?
Side Bend LED Neon Flex DL-T1225F | 12x25mm | 5V | 96 LEDs/m: ≥ 96 LEDs/m, DC 5V, 12mm FPCB, cut unit 1LED/10mm. Photometric files, wiring diagrams and test reports are available in the downloads block on this page.
Which LED driver and run length suit #DL-T1225F?
Side Bend LED Neon Flex DL-T1225F | 12x25mm | 5V | 96 LEDs/m is a constant-voltage DC 5V product, so pair it with a CE or UL listed DC 5V constant-voltage LED driver rated about 20% above the connected load. Maximum single run is 5m. 5m Single / 10m Dual Input power. Feeding from both ends or mid-feeding halves the copper distance and roughly quarters the voltage drop.
Side Bending LED Neon Flex — Buyer Questions
What is a side bending LED neon flex?
A side bend neon strip flexes left and right in the plane of the emitting face, so the run can follow a curve drawn on a wall or ceiling without twisting. The FPCB is built narrow with a serpentine copper layout, which is what allows horizontal bending without cracking the copper or stressing the solder joints.
- Series Side Bend Neon Flex series
- Related series LED neon flex bend directions compared
- Related series top bend bodies for vertical curves
- Product DL-SV-1018 side bend neon flex
Side bend or top bend — which one does my layout need?
Trace the run on the drawing: if the curve stays flat against the mounting surface (a circle on a wall, a wave along a ceiling), you need a side bending neon flex. If the curve climbs over an edge or follows a dome, you need top bend. Mixed geometry is normally split into two lengths joined at a straight section rather than forced onto one body.
- Series Side Bend Neon Flex series
- Guide plan feed points across joined lengths
- Related series round bodies that bend both ways
- Product DL-T0613F bend-direction matched neon
What is the minimum bend radius of a side emitting bendable neon strip?
Typical side bend bodies hold R30 mm at 6×12 mm and R80–R120 mm at 12×25 mm; the wider the body in the bend plane, the larger the radius. Staying above the rated radius keeps the outer wall from whitening and prevents the pitch from opening up into visible dark spots on the outside of the curve.
- Series Side Bend Neon Flex series
- Guide why copper layout sets the bend radius
- Related series S-bend FPCB strips for tight corners
- Product 0612S-EE tight-radius side bend body
Is side bend neon flex used for building contour lighting?
It is the default choice. Building contour and outline work follows the plane of the façade — cornices, arches, balcony edges — so the run must bend sideways while staying flat against the substrate. Combined with an IP67 injection-moulded body and stainless clips, a side bend LED neon flex holds a clean architectural outline through weather cycling.
- Series Side Bend Neon Flex series
- Related series IP67 injection bodies for façade work
- Guide project-scale neon supply for contractors
- Product DL-T1220F1 façade side bend neon
Can flexible neon for curved walls be pre-shaped at the factory?
Yes. Send the radius set or a DXF outline and DENO supplies pre-formed lengths in a moldable bend groove, cut and terminated per segment. This removes on-site guesswork on scripts and logos, where an installer bending by hand will otherwise produce inconsistent curve tension along the run.
- Series Side Bend Neon Flex series
- Guide send a curve drawing for quotation
- Related series special-build and made-to-drawing lighting
How far can one side bend neon run go on a single feed?
At 24V constant voltage, a 10 W/m body holds acceptable uniformity to about 5 m single-end or 10 m fed from both ends. Beyond that, use a constant-current build or 48V so the far end of the outline does not read dimmer than the start — the failure mode that shows up most on long contour runs.
- Series Side Bend Neon Flex series
- Related series long LED strip lights for extended runs
- Guide run a voltage-drop check
- Product 1018S-EE long-run side bend neon