DENO LED Lighting

LED Strip with Lens | 15/30/60 Beam Angle | DENO

DENO LED strips with lenses control light distribution at the source instead of relying only on a separate profile diffuser. Depending on the model, integrated optics can create narrow, wide or application-specific beams for shelving, grazing, display lighting and compact linear luminaires. Buyers should choose from the beam data published for each model rather than assuming one angle across the whole series. Voltage, PCB width, LED pitch, power, mounting distance and thermal management also affect the finished result. Custom optical and board configurations can be reviewed for OEM projects.

SMD Strips with Lenses models & key specifications (3)

24V SMD Strips With Lenses Models (1)

6678 — 6060 · 60 LEDs/m · 24V

6678 SMD Strips with Lenses — 24V, cuttable every 33.3mm, 10mm FPCB width, 6060 LEDs, 60 LEDs/m, IP20

LED Type: 6060 · LED Density: 60 · Voltage: 24V · Power: 7.2~24W · Cutting Unit: 2LEDs/33.33mm · PCB Width: 10 · Copper Foil: 2oz · Circuit Type: CV · IP Rating: IP20

12V SMD Strips With Lenses Models (2)

6710 — 6060 · 50 LEDs/m · 12V

6710 SMD Strips with Lenses — 12V, cuttable every 48*48mm, 240x480mm FPCB width, 6060 LEDs, 50 LEDs/m, 2700-6500

LED Type: 6060 · LED Density: 50 LEDs/pcs · CCT: 2700-6500 · CRI: Ra≥80 · Voltage: DC 12V · Power: 10~60W · Cutting Unit: 1LED/48*48mm · PCB Width: 240x480mm · Copper Foil: 2oz · Circuit Type: CV · IP Rating: IP20

8562 — 6060 · 32 LEDs/m · 12V

8562 SMD Strips with Lenses — 12V, cuttable every 31.3mm, 10mm FPCB width, 6060 LEDs, 32 LEDs/m, IP20

LED Type: 6060 · LED Density: 32 · Voltage: 12V · Power: 3.8~23W · Cutting Unit: 1LED/31.25mm · PCB Width: 10 · Copper Foil: 2oz · Circuit Type: CV · IP Rating: IP20

Frequently asked questions

What is the benefit of an LED strip with an integrated lens?

The lens redirects the LED output into a defined distribution, giving the designer more control over beam spread, throw and glare than an uncovered LED package.

Which beam angles are available?

Beam options are model-specific and may include narrow, medium or wide distributions. Check the product photometric data before selecting a strip for wall grazing, shelves or general illumination.

Can DENO customise the lens or beam distribution?

OEM optical options can be evaluated against order quantity, PCB layout, target beam, mounting distance and required ingress protection.

When is a lens LED strip better than a strip with a diffuser?

A diffuser spreads light and loses output, while a lens redirects it. Use a lens LED strip with a 15 or 30 degree beam when light must travel down a tall wall, a deep shelf or a narrow slot, and use asymmetric optics for even wall washing from a close mounting position.