What does 1 SDCM mean on an LED strip?

SDCM is the Standard Deviation of Colour Matching — the size of the MacAdam ellipse a batch's chromaticity falls inside. A 1 SDCM LED strip keeps every LED within one ellipse of the target point, which is below the threshold the human eye can resolve, so a wall wash reads as one continuous colour instead of a series of slightly different whites.

3 SDCM vs 1 SDCM — is the difference visible on a real installation?

On a single short run, rarely. On a long cove, a mirrored pair of coffers or two reels butted end to end, 3 SDCM shows as a visible pink-to-green drift between sections, while 1 SDCM does not. Specify 1 SDCM whenever two lit surfaces are seen at once, on white joinery, or in retail and gallery lighting where the colour of the merchandise is the product.

How does DENO hold 1 SDCM colour consistency across a production batch?

Three controls stack: single-bin LED sourcing from one wafer lot, in-line chromaticity sampling on the SMT line, and reel-level records so a repeat order can be matched to the original batch. Boards outside the ellipse are pulled before packing rather than blended into the run.

Will a re-order months later still match my installed 1 SDCM LED strip?

Yes, when the original batch reference is quoted on the purchase order. DENO archives the bin and reel data for each 1 SDCM build, so a replacement section or a phase-two extension is produced from the same bin instead of the current stock bin — the usual cause of a mismatched repair on architectural projects.

Does tight colour binning affect brightness or efficacy?

Not measurably. Binning narrows chromaticity, not flux: a 1 SDCM board is drawn from the same flux bin as the standard build, so lm/W and lm/m stay on the published matrix. What does change is yield, which is why colour-critical builds carry a small premium over 3 SDCM tape.

Which applications actually need a 1 SDCM LED strip?

Museum and gallery lighting, retail displays and cosmetics counters, hotel and residential coves with sightlines across several bays, film and photo studio fill, and any white-on-white joinery detail. For back-of-house, machine and signage work 3 SDCM is normally sufficient and the cheaper specification.

2835 1 SDCM Classic High Consistency LED Strip Light (#2176-B)

10mm · 24V · 120LEDs · 50mm/cut

Model: 2176-B

2176-B 10mm | 24V | 120LEDs | 50mm/cut | #2176-B | 2835 1 SDCM Classic High Consistency LED Strip Light — 24V, cuttable every 50mm, 10mm FPCB width, 2835 LEDs, 120 LEDs/m, 2700-6500

Overview

10mm | 24V | 120LEDs | 50mm/cut | #2176-B | 2835 1 SDCM Classic High Consistency LED Strip Light is part of the DENO 1 SDCM SMD Strips series, engineered around 1 SDCM LED strip. Key specifications: 2835, 120, 24V, 10 PCB, 3oz copper FPCB, cuttable 6LEDs/50mm, IP20/IP54/IP65/IP66/IP67/IP68, CRI Ra≥90. Every reel is produced on DENO's roll-to-roll line with 99.9% pure copper FPCB and ships CE, UL and RoHS compliant for architectural, retail and hospitality projects. OEM and ODM configurations of length, colour temperature and waterproofing are available on request.

Description

Engineered with premium 2835 SMD LEDs, this LED strip light achieves strict single-bin color consistency under one MacAdam Step with Ra≥90 rendering. Built on a durable 10mm 3oz copper PCB, the circuit hosts 120 LEDs per meter with precise cut points every 50mm. Operating at 24V constant voltage, the design supports seamless dimming control through standard PWM, DALI, and 0–10V protocols. Available from IP20 to IP68, this solution is tailored for architectural lighting with factory-direct wholesale project supply and OEM customization.

We use 99.99% gold wire, large-size chips, and thickened FPCB, backed by a 5-year warranty.

Specifications

CCT (K)	2700-6500
CRI	Ra≥90
SDCM	< 1 SDCM (Single Bin)
POWER (W/M)	12 W/m
LED QTY	120
PART NO	DL-F28A60V24-2176-B-*
SMD TYPE	2835
CUTTABLE UNIT	6LEDs/50mm
DIMMABLE	Yes
IP RATING	IP20/IP54/IP65/IP66/IP67/IP68
LED PITCH	8.3mm
LIFESPAN	50000
PCB WIDTH	10
WARRANTY	5 Years
BEAM ANGLE	120°
RUN LENGTH	5m
COPPER FOIL	3oz
CIRCUIT TYPE	C.V.
INPUT VOLTAGE	24V
LUMINOUS FLUX	1163 lm/m
OPERATING TEMPERATURE	-25~40°C;Tc：75°C（max）

Applications

Cove, wall-wash & perimeter lighting — Coves, recesses, wall-wash details and ceiling perimeters where a continuous, uniform line of light is required.
Showroom & hospitality display lighting — Shelving, display cases, reception desks and signage backlighting in shops, showrooms and hospitality spaces.
Kitchen & wardrobe under-cabinet lighting — Kitchen, wardrobe and furniture task lighting where the strip stays hidden and only the light is seen.

Recommended accessories & compatible parts

DL-1003 — 19.1x8mm Surface Mount LED Channel — Dotless Aluminum Profile for 240 LEDs/m Strip: Accepts LED strips up to 10mm wide.
DL-1103-1 — 16x13mm Surface Mount LED Channel — Aluminum Profile for 10mm LED Strip: Accepts LED strips up to 10mm wide.
DL-1510 HX-F — 15x9.9mm Recessed LED Channel with Flange — Flush Mount Aluminum Profile: Accepts LED strips up to 10mm wide.
DN-PSU-100 — 24V 100W Class-2 LED Driver · High Efficiency: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
DN-PSU-150 — 24V 150W Class-2 LED Driver · Premium: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
DN-PSU-60 — 24V 60W Class-2 LED Driver · Constant Voltage: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
V1 — 5-36VDC 1-Channel * 8A RF+Push Dimming Controller | V1: Matched by input voltage range and colour channels.

Request a quotation for #2176-B

DENO LED is a Shenzhen-based LED strip manufacturer with its own Foshan production base. Send the run length, voltage, CCT/CRI and IP rating you need and our engineering team replies with a specification sheet, wiring plan and price — OEM/ODM and fully custom builds included.

Warranty: 5 years
Lead time: standard boards: samples from 1 working day · custom: 3–5 working days · new FPCB: 1–3 weeks · production 1–2 weeks after sample approval
Compliance: CE · UL · RoHS
Bonding wire: 99.99% pure gold
Copper foil: 99.9% pure copper FPCB

Contact DENO LED engineers · OEM / ODM capability

Photometric Performance — CCT × CRI Efficacy Matrix

Peak measured luminous efficacy: 116.5 lm/W at 5000K, Ra 90, ErP energy class F (Grade DN (1st Tier) · 9.6W/m).

All values are measured at the stated power density and ambient 25 °C, reported as luminous efficacy in lumens per watt (lm/W), luminous flux per metre (lm/m) and the corresponding EU ErP (2019/2015) energy class.

Grade DL (2nd Tier) · 9.6W/m

Grade DL (2nd Tier) · 9.6W/m — measured at 9.6 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	—	—	—	74.3 lm/W	713 lm/m	G	—	—	—
2300 K	—	—	—	82.7 lm/W	794.3 lm/m	G	—	—	—
2700 K	—	—	—	89.6 lm/W	859.9 lm/m	F	—	—	—
3000 K	—	—	—	94.3 lm/W	905 lm/m	F	—	—	—
3500 K	—	—	—	95.9 lm/W	920.6 lm/m	F	—	—	—
4000 K	—	—	—	98.2 lm/W	943.2 lm/m	F	—	—	—
5000 K	—	—	—	98.1 lm/W	942.2 lm/m	F	—	—	—
6500 K	—	—	—	94.2 lm/W	904 lm/m	F	—	—	—

Grade DL (2nd Tier) · 12W/m

Grade DL (2nd Tier) · 12W/m — measured at 12 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	—	—	—	73 lm/W	876.4 lm/m	G	—	—	—
2300 K	—	—	—	81.4 lm/W	976.3 lm/m	G	—	—	—
2700 K	—	—	—	88.1 lm/W	1056.9 lm/m	F	—	—	—
3000 K	—	—	—	92.7 lm/W	1112.3 lm/m	F	—	—	—
3500 K	—	—	—	94.3 lm/W	1131.6 lm/m	F	—	—	—
4000 K	—	—	—	96.6 lm/W	1159.3 lm/m	F	—	—	—
5000 K	—	—	—	96.5 lm/W	1158.1 lm/m	F	—	—	—
6500 K	—	—	—	92.6 lm/W	1111.1 lm/m	F	—	—	—

Grade DL (2nd Tier) · 14W/m

Grade DL (2nd Tier) · 14W/m — measured at 14 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	—	—	—	72 lm/W	1008.2 lm/m	G	—	—	—
2300 K	—	—	—	80.2 lm/W	1123.1 lm/m	G	—	—	—
2700 K	—	—	—	86.8 lm/W	1215.9 lm/m	F	—	—	—
3000 K	—	—	—	91.4 lm/W	1279.6 lm/m	F	—	—	—
3500 K	—	—	—	93 lm/W	1301.7 lm/m	F	—	—	—
4000 K	—	—	—	95.3 lm/W	1333.6 lm/m	F	—	—	—
5000 K	—	—	—	95.2 lm/W	1332.2 lm/m	F	—	—	—
6500 K	—	—	—	91.3 lm/W	1278.2 lm/m	F	—	—	—

Grade DL (2nd Tier) · 19.2W/m

Grade DL (2nd Tier) · 19.2W/m — measured at 19.2 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	—	—	—	69.4 lm/W	1333 lm/m	G	—	—	—
2300 K	—	—	—	77.3 lm/W	1485 lm/m	G	—	—	—
2700 K	—	—	—	83.7 lm/W	1607.7 lm/m	G	—	—	—
3000 K	—	—	—	88.1 lm/W	1691.9 lm/m	F	—	—	—
3500 K	—	—	—	89.6 lm/W	1721.2 lm/m	F	—	—	—
4000 K	—	—	—	91.8 lm/W	1763.3 lm/m	F	—	—	—
5000 K	—	—	—	91.7 lm/W	1761.5 lm/m	F	—	—	—
6500 K	—	—	—	88 lm/W	1690.1 lm/m	F	—	—	—

Grade DL (2nd Tier) · 24W/m

Grade DL (2nd Tier) · 24W/m — measured at 24 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	—	—	—	67.1 lm/W	1611 lm/m	G	—	—	—
2300 K	—	—	—	74.8 lm/W	1794.7 lm/m	G	—	—	—
2700 K	—	—	—	81 lm/W	1943 lm/m	G	—	—	—
3000 K	—	—	—	85.2 lm/W	2044.8 lm/m	F	—	—	—
3500 K	—	—	—	86.7 lm/W	2080.2 lm/m	F	—	—	—
4000 K	—	—	—	88.8 lm/W	2131.1 lm/m	F	—	—	—
5000 K	—	—	—	88.7 lm/W	2128.9 lm/m	F	—	—	—
6500 K	—	—	—	85.1 lm/W	2042.6 lm/m	F	—	—	—

Grade DN (1st Tier) · 9.6W/m

Grade DN (1st Tier) · 9.6W/m — measured at 9.6 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	—	—	—	88.4 lm/W	848.2 lm/m	G	—	—	—
2300 K	—	—	—	98.6 lm/W	946.1 lm/m	F	—	—	—
2700 K	—	—	—	106.6 lm/W	1023.5 lm/m	F	—	—	—
3000 K	—	—	—	112.6 lm/W	1081.3 lm/m	F	—	—	—
3500 K	—	—	—	115.1 lm/W	1104.8 lm/m	F	—	—	—
4000 K	—	—	—	115.7 lm/W	1110.7 lm/m	F	—	—	—
5000 K	—	—	—	116.5 lm/W	1118.5 lm/m	F	—	—	—
6500 K	—	—	—	111.3 lm/W	1068.5 lm/m	F	—	—	—

Grade DN (1st Tier) · 12W/m

Grade DN (1st Tier) · 12W/m — measured at 12 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	—	—	—	86.9 lm/W	1042.5 lm/m	G	—	—	—
2300 K	—	—	—	96.9 lm/W	1162.9 lm/m	F	—	—	—
2700 K	—	—	—	104.8 lm/W	1258 lm/m	F	—	—	—
3000 K	—	—	—	110.7 lm/W	1329 lm/m	F	—	—	—
3500 K	—	—	—	113.2 lm/W	1357.9 lm/m	F	—	—	—
4000 K	—	—	—	113.8 lm/W	1365.1 lm/m	F	—	—	—
5000 K	—	—	—	114.6 lm/W	1374.7 lm/m	F	—	—	—
6500 K	—	—	—	109.4 lm/W	1313.3 lm/m	F	—	—	—

Grade DN (1st Tier) · 14W/m

Grade DN (1st Tier) · 14W/m — measured at 14 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	—	—	—	85.7 lm/W	1199.3 lm/m	G	—	—	—
2300 K	—	—	—	95.6 lm/W	1337.8 lm/m	F	—	—	—
2700 K	—	—	—	103.4 lm/W	1447.2 lm/m	F	—	—	—
3000 K	—	—	—	109.2 lm/W	1528.9 lm/m	F	—	—	—
3500 K	—	—	—	111.6 lm/W	1562.1 lm/m	F	—	—	—
4000 K	—	—	—	112.2 lm/W	1570.4 lm/m	F	—	—	—
5000 K	—	—	—	113 lm/W	1581.5 lm/m	F	—	—	—
6500 K	—	—	—	107.9 lm/W	1510.9 lm/m	F	—	—	—

Grade DN (1st Tier) · 19.2W/m

Grade DN (1st Tier) · 19.2W/m — measured at 19.2 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	—	—	—	82.6 lm/W	1585.7 lm/m	G	—	—	—
2300 K	—	—	—	92.1 lm/W	1768.8 lm/m	F	—	—	—
2700 K	—	—	—	99.7 lm/W	1913.5 lm/m	F	—	—	—
3000 K	—	—	—	105.3 lm/W	2021.5 lm/m	F	—	—	—
3500 K	—	—	—	107.6 lm/W	2065.5 lm/m	F	—	—	—
4000 K	—	—	—	108.1 lm/W	2076.5 lm/m	F	—	—	—
5000 K	—	—	—	108.9 lm/W	2091.1 lm/m	F	—	—	—
6500 K	—	—	—	104 lm/W	1997.7 lm/m	F	—	—	—

Grade DN (1st Tier) · 24W/m

Grade DN (1st Tier) · 24W/m — measured at 24 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	—	—	—	79.9 lm/W	1916.4 lm/m	G	—	—	—
2300 K	—	—	—	89.1 lm/W	2137.7 lm/m	G	—	—	—
2700 K	—	—	—	96.4 lm/W	2312.6 lm/m	F	—	—	—
3000 K	—	—	—	101.8 lm/W	2443.1 lm/m	F	—	—	—
3500 K	—	—	—	104 lm/W	2496.2 lm/m	F	—	—	—
4000 K	—	—	—	104.6 lm/W	2509.5 lm/m	F	—	—	—
5000 K	—	—	—	105.3 lm/W	2527.2 lm/m	F	—	—	—
6500 K	—	—	—	100.6 lm/W	2414.3 lm/m	F	—	—	—

High-Power LED Strip: Heat Dissipation & Aluminum Channel Guide

At up to 24W/m, 2176-B is a high-power SMD LED strip. Above roughly 14.4W/m the tape can no longer shed its own heat through the FPC alone — an aluminum channel is part of the luminaire, not an accessory.

Why high-wattage strips need a heat sink

Aluminum conducts heat roughly 30× faster than the plastics, MDF or gypsum a strip is usually stuck to, so a bare high-power run traps heat under the tape.
LED lifetime (LM-80 / TM-21) is driven by solder-point temperature Tc. Keeping Tc inside the datasheet limit — DENO strips are rated Tc ≤ 75°C — is what preserves the rated L70 lifetime and colour stability.
Never run 14.4W/m or more coiled on the reel, inside a sealed plastic diffuser, or directly on wood, wallpaper or foam.

Sizing rule: FPC width vs channel inner width

Channel inner width ≥ FPC width + 2mm. This strip is 10mm wide, so it needs at least 12mm of inner width.
The 2mm clearance absorbs extrusion tolerance and lets the tape be seated or replaced without scraping the side walls or the wiring.
A frosted or opal PC cover then diffuses the higher lumen output into an even, dot-free line instead of visible hot spots.

Aluminum channels that fit this strip

Recommended LED Channels

Mount this LED strip in a DENO LED aluminum profile for heat dissipation, physical protection and diffused, dot-free output.

This strip is 10mm wide, so it needs a channel with at least 12mm inner width (10mm + 2mm clearance). Every profile below meets that.

Related models in this series

See every model in SMD LED Strip Series or narrow to 2835. Compare wattage, lumen output and run length in the ProCalc parameter library, or request OEM/ODM pricing on the custom manufacturing page.

Frequently Asked Questions

What are the key specifications of 2176-B?

2176-B: 2835, 120, 24V, 10 PCB, 3oz copper FPCB, cuttable 6LEDs/50mm, IP20/IP54/IP65/IP66/IP67/IP68, CRI Ra≥90. Full photometric data, wiring diagrams and test reports are available in the downloads section of this page.

What colour temperatures and CRI options does this 1 SDCM LED strip offer?

This model is supplied as a 1 SDCM LED strip with CRI Ra≥90 and 2700-6500 colour temperature options. DENO bins every batch for colour consistency, and custom CCT or spectrum combinations can be produced for project quantities.

Can DENO customise this 1 SDCM LED strip for a project?

Yes. DENO manufactures the 1 SDCM SMD Strips series as an OEM and ODM supplier: reel length, colour temperature, CRI grade, PCB width, waterproofing and private labelling can all be specified. Request a quote for lead time and project pricing.

What does 1 SDCM mean on a high CRI LED strip?

1 SDCM means every LED falls inside one MacAdam ellipse, so no visible colour difference exists between reels or between fixtures. Combined with Ra>90 and R9>50, this high CRI LED strip keeps white points matched across a whole project, which matters in retail, museum and hospitality installations where several runs sit side by side.

Which LED driver and run length suit #2176-B?

10mm | 24V | 120LEDs | 50mm/cut | #2176-B | 2835 1 SDCM Classic High Consistency LED Strip Light is a constant-voltage 24V product, so pair it with a CE or UL listed 24V constant-voltage LED driver rated about 20% above the connected load. Maximum single run is 5m. 5m Single / 10m Dual Input power. Feeding from both ends or mid-feeding halves the copper distance and roughly quarters the voltage drop.

Engineering & selection guide

Bending limits, IP selection, voltage drop, cutting and the full buyer Q&A for this family are kept on the series page.

1 SDCM LED Strips series — 1 SDCM LED Strip — Buyer Questions
LED strip engineering selection handbook