DENO LED Lighting

20m Single-Feed Linear CC RGBW LED Strip (#4905)

20m Single End · 40m Dual End · On-Board Linear CC ICs · 3oz Copper · Soft True Colour

Model: 4905

4905 rgbw led strip — 24V, cuttable every 100mm, 12mm FPCB width, 5050 LEDs, 60 LEDs/m, 3000K

Overview

5050 Ultra-long RGBW LED Strip Light | 12mm | 24V | 60LEDs | 100mm/cut | #4905 is part of the DENO RGBW SMD Strips series, engineered around RGBW LED strip lights. Key specifications: 5050, 60, 24V, 12 PCB, 3oz copper FPCB, cuttable 6LEDs/100mm. Every reel is produced on DENO's roll-to-roll line with 99.9% pure copper FPCB and ships CE, UL and RoHS compliant for architectural, retail and hospitality projects. OEM and ODM configurations of length, colour temperature and waterproofing are available on request.

Description

Linear constant-current 5050 RGBW LED strip built for long architectural runs: one feed powers 20 m at 9.6 W/m (40 m from both ends), or 13 m at 14.4 W/m, with the same white and colour at the far end as at the feed. It removes the usual long-run problems: yellowing or dim far ends, a feed cable every 5 m, and leak-prone mid-run splices in outdoor neon or tube. Selected premium chips give clean, true red, green and blue plus a soft dedicated 3000K white, instead of the harsh colour of many unbranded chips. 12 mm 3oz copper PCB, 60 LEDs/m, cut every 100 mm, IP20 to IP68. DENO can adjust white CCT and protection for project supply.

Long-run RGBW strip: 20 m from one feed with no far-end colour shift.

Specifications

CCT (K)3000K
CRIRa≥80
POWER (W/M)9.6 W/m
LED QTY60
PART NODL-F50A30V24-4905-*
SMD TYPE5050
CUTTABLE UNIT6LEDs/100mm
DIMMABLEYes
IP RATINGIP20/IP65/IP67/IP68
LED PITCH16.66mm
LIFESPAN50000
PCB WIDTH12
WARRANTY5 Years (IP20 indoor) / 3 Years (IP65 / IP67 / IP68 waterproof)
RUN LENGTH20m
COPPER FOIL3oz
POWER RANGE4.8~19.2W
CIRCUIT TYPEC.C.
INPUT VOLTAGE24V
LUMINOUS FLUX65–620 lm/m
OPERATING TEMPERATURE-25~40°C;Tc：75°C（max）

Why this strip solders and fits differently

Linear constant current on every 100mm unit

No yellow or dim far end

Each 6-LED unit carries its own linear constant-current ICs, so LED current stays fixed as voltage falls along the run. White and colour at the far end match the feed end.

20m at 9.6W/m, 13m at 14.4W/m

Double it by feeding both ends

Standard 9.6W/m runs 20m (65.6ft) from one end and 40m from both ends. The 14.4W/m option runs 13m from one end. Fewer feed cables, junction points and drivers on site.

Soft, true colour from selected chips

Not the harsh colour of unbranded chips

Selected premium 5050 chips give clean red, green and blue plus a soft dedicated 3000K white channel, suited to hotel, retail and architectural projects worldwide. 12mm FPCB, 3oz copper, IP20 / IP65 / IP67 / IP68.

Four site problems #4905 removes

  • Far end turns yellow or dim: linear CC ICs on every 100 mm unit hold LED current steady, so white and colour stay the same from the first metre to the last.
  • A feed cable every 5 m: one feed covers 20 m at 9.6 W/m (40 m from both ends) — fewer cables, junction points, drivers and labour hours.
  • Leaks at mid-run splices outdoors: a 20 m continuous waterproof run means no cut-and-reseal points inside neon or tube.
  • Harsh, plasticky RGB colour: selected premium chips give clean, true red, green and blue plus a soft dedicated white.

How far one feed reaches

Power optionSingle-end feedBoth-ends feed
9.6 W/m (standard)20 m (65.6 ft)40 m (131.2 ft)
14.4 W/m (high output)13 m (42.7 ft)26 m (85.3 ft)

Why we invest in the chip

Many unbranded 5050 RGB chips produce colour that looks hard and saturated-flat. DENO builds #4905 (and its RGB sibling #3665) with selected premium chips, so red, green and blue look clean and true, and the separate 3000K white channel gives a soft, comfortable white. Colour that suits hotel, retail, hospitality and architectural projects in every market.

One waterproof reel, every channel lit

DENO test data (IP20, 1 m sample): RGBW all channels 9.6 W/m 620 lm/m; White 3000K 235 lm/m; Red 70 lm/m; Green 265 lm/m; Blue 65 lm/m. Warranty: 5 years IP20 indoor / 3 years IP65, IP67, IP68 waterproof.

Applications

  • Cove, wall-wash & perimeter lighting — Coves, recesses, wall-wash details and ceiling perimeters where a continuous, uniform line of light is required.
  • Showroom & hospitality display lighting — Shelving, display cases, reception desks and signage backlighting in shops, showrooms and hospitality spaces.
  • Kitchen & wardrobe under-cabinet lighting — Kitchen, wardrobe and furniture task lighting where the strip stays hidden and only the light is seen.
  • Long corridor & warehouse runs — Long single-feed runs on 24V cover corridors, warehouse aisles and facade lines with fewer injection points and fewer power supplies.
  • Entertainment & media-facade colour scenes — Entertainment venues, media facades, gaming rooms and branded retail installs driven by DMX/SPI or standard RGB controllers.

Recommended accessories & compatible parts

  • DL-1201 — 25x14.5mm Wide Surface Mount LED Channel — Aluminum Profile for 12mm Strip: Accepts LED strips up to 12mm wide.
  • DL-1202 — 17.3x14.5mm Surface Mount LED Channel — Deep Aluminum Profile for 12mm Strip: Accepts LED strips up to 12mm wide.
  • DL-1204 — 25x7mm Wide Slim Surface Mount LED Channel — Dotless Aluminum Profile for 240 LEDs/m: Accepts LED strips up to 12mm wide.
  • DN-PSU-100 — 24V 100W Class-2 LED Driver · High Efficiency: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
  • DN-PSU-150 — 24V 150W Class-2 LED Driver · Premium: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
  • DN-PSU-60 — 24V 60W Class-2 LED Driver · Constant Voltage: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
  • V4 — 12-48VDC 4-Channel * 5A RF+Push Dimming RGBW Controller | V4: Matched by input voltage range and colour channels.

Request a quotation for #4905

DENO LED is a Shenzhen-based LED strip manufacturer with its own Foshan production base. Send the run length, voltage, CCT/CRI and IP rating you need and our engineering team replies with a specification sheet, wiring plan and price — OEM/ODM and fully custom builds included.

  • Warranty: 5 years
  • Lead time: standard boards: samples from 1 working day · custom: 3–5 working days · new FPCB: 1–3 weeks · production 1–2 weeks after sample approval
  • Compliance: CE · UL · RoHS
  • Bonding wire: 99.99% pure gold
  • Copper foil: 99.9% pure copper FPCB

Contact DENO LED engineers · OEM / ODM capability

High-Power LED Strip: Heat Dissipation & Aluminum Channel Guide

At up to 19.2W/m, 4905 is a high-power SMD LED strip. Above roughly 14.4W/m the tape can no longer shed its own heat through the FPC alone — an aluminum channel is part of the luminaire, not an accessory.

Why high-wattage strips need a heat sink

  • Aluminum conducts heat roughly 30× faster than the plastics, MDF or gypsum a strip is usually stuck to, so a bare high-power run traps heat under the tape.
  • LED lifetime (LM-80 / TM-21) is driven by solder-point temperature Tc. Keeping Tc inside the datasheet limit — DENO strips are rated Tc ≤ 75°C — is what preserves the rated L70 lifetime and colour stability.
  • Never run 14.4W/m or more coiled on the reel, inside a sealed plastic diffuser, or directly on wood, wallpaper or foam.

Sizing rule: FPC width vs channel inner width

  • Channel inner width ≥ FPC width + 2mm. This strip is 12mm wide, so it needs at least 14mm of inner width.
  • The 2mm clearance absorbs extrusion tolerance and lets the tape be seated or replaced without scraping the side walls or the wiring.
  • A frosted or opal PC cover then diffuses the higher lumen output into an even, dot-free line instead of visible hot spots.

Aluminum channels that fit this strip

Recommended LED Channels

Mount this LED strip in a DENO LED aluminum profile for heat dissipation, physical protection and diffused, dot-free output.

This strip is 12mm wide, so it needs a channel with at least 14mm inner width (12mm + 2mm clearance). Every profile below meets that.

Related models in this series

See every model in SMD LED Strip Series or narrow to 5050. Compare wattage, lumen output and run length in the ProCalc parameter library, or request OEM/ODM pricing on the custom manufacturing page.

Frequently Asked Questions

How can an RGBW strip run 20 m from one feed without colour shift?

Linear constant-current ICs on every 100 mm unit hold LED current steady, and the 3oz copper PCB keeps losses low, so at 9.6 W/m the far end shows the same white and colour as the feed end over 20 m.

What are the maximum run lengths for #4905?

9.6 W/m: 20 m single-end, 40 m both-ends. 14.4 W/m: 13 m single-end, 26 m both-ends.

How many power feeds does #4905 save on a 40 m project?

A typical 24V constant-voltage RGBW strip is usually re-fed about every 5 m. #4905 covers 40 m with feeds only at the two ends, cutting cables, junction points and labour.

Is #4905 suitable for neon or waterproof tubing?

Yes. A 20 m continuous run slides into neon or clear tube with no mid-run splices, removing the most common water entry point. IP65, IP67 and IP68 versions are available.

Why do the colours look softer than other RGBW strips?

DENO uses selected premium chips. Many unbranded chips give a hard, garish red, green and blue; #4905 gives clean, true colour plus a soft dedicated 3000K white channel.

Engineering & selection guide

Bending limits, IP selection, voltage drop, cutting and the full buyer Q&A for this family are kept on the series page.